Posted on

Twist The Pile

Twist The Pile

When handling freshly printed carbonless stock, you can quickly and effeciently separate the printed sets with this simple technique.

The last sheet of a carbonless set is not coated, nor it the top of the first sheet, and, as a result, there is much less friction between these sheets than those that ‘are’ coated within the set.

To separate a managable stack of printed NCR sets from your pile, lift/separate the corner sheets at one one side with your left hand while pressing down on the ‘opposite top corner’ with your other hand.

Then twist/spin the upper portion of the pile and the printed sets will automatically separate at the bottom and top sheets at a mating set.