Description
Please call or contact us for updated price and availability
The model M1316-ST-KM Kompac II with Kolormate Oscillator Roll fits the T-51 S-1 Super T Second Color Presses installed on Multilith models 1450 and 1650 presses.
If there ever was a T-51 model that benefits from the Kompac dampener, its the S1, as the S1 will out print its parent press reguardless of the press model its installed on, if it has a Kompac dampener!
The addition of the Kompac II with Kolormate to the T-51 second color head allows it to use big press ink formulas, adding new life and greater printing capabilities.
The thinner ink films possible with Kompac dampening allows the second color down to release without pulling the ink film of the first color. With Kompac dampening on your T-51 second color head, you can now lay down just the right film of ink to print the image ‘without’ over-inking, the primary cause of cross-color ink contamination. With just the right amount of ink on the blanket, sheets remove all wet ink with each impression leaving no excess residual to cause cross-color contamination.
Now (if you can hold your plate securely and register the sheets) you can print short-run process color on a common blanket press just like the QuickMaster 46-2!
Kompac dampening reduces set-up stock waste by 50% or more, increases inking capacity by 20%, allows higher press speeds, low tack inks produce less sheet curl.
Kompac dampening turns these fine little presses into high quality printing presses that for their sheet size can print quality more like that normally expected from a much larger and more expensive press.
If you print for profit, you’ll make 10% more profit per press per year with Kompacs on your presses!